No Ring-Redundancy - Siemens SCALANCE XM-400 Configuration Manual

The parameters have the following meaning:
Parameter
ard
mrpauto
mrpclient
hrpclient
hrpmanager
Result
The ring redundancy function is enabled and the redundancy mode is selected.
Further notes
You disable the ring redundancy function with the
8.5.5.5

no ring-redundancy

Description
With this command, you disable the ring redundancy function on a device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ring-redundancy
Result
The ring redundancy function is disabled.
Further notes
You enable the ring redundancy function with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Enables the automatic redundancy mode (Automatic Redundancy Detec-
tion)
Enables the automatic MRP manager
Enables ring redundancy with the MRP protocol as client
Enables ring redundancy with the HRP protocol as client
Enables ring redundancy with the HRP protocol in ring redundancy manag-
er mode
Layer 2 management protocols
8.5 Ring redundancy and standby connection
command.
no ring-redundancy
ring-redundancy mode
command.
477