No Vrrp Track Decrement - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

no vrrp track decrement

With this command, you delete the assignment of interface tracking to a VRRP interface and

the value by which the priority is reduced..

This command is available only with layer 3.

You are in the VRRP Interface configuration mode.

The command prompt is as follows:

cli(config-vrrp-if)#

Call up the command with the following parameters:

no vrrp <vrid(1-255)> track

The parameter has the following meaning:

The assignment and the value by which the priority will be reduced is defined are deleted.

Further notes

You assign a VRRP interface to an interface tracking and configure the value by which the

priority is reduced with the command

You display the assignment and value of the priority with the command

show vrrp interface - vrid

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

ID of the virtual router

no vrrp track

with the parameter

Range of values / note

show vrrp interface

Layer 3 functions

9.4 VRRPv2 (IPv4)