The User Interface; Starting The User Interface - Siemens Giga762SX User Manual

The user interface

You have connected a PC to the Giga762SX WLAN dsl and possibly made the settings in
the local area network. You can now configure the Giga762SX WLAN dsl using this PC
from the user interface of the Giga762SX WLAN dsl. We recommend for initial configu-
ration that you connect the PC in wired mode. As Internet browser we recommend
Microsoft Internet Explorer V 6.0 or higher, or Mozilla Firefox V 1.0 or higher.
Note:
To start the configuration environment, you may need to deactivate the HTTP proxy
for your browser.
If you use Window Vista or Windows XP Service Pack 2, you will need to configure the
popup blocker.
You will find additional information on these two points on "Deactivating HTTP proxy
and configuring a pop-up blocker" on page 163.
If you use a firewall, it must allow connection to the Giga762SX WLAN dsl. For details,
refer to the user guide for your firewall. If necessary, deactivate the firewall while you
configure your Giga762SX WLAN dsl.

Starting the user interface

To access the user interface of the Giga762SX WLAN dsl:
ì
Start your Internet browser.
ì
Enter the IP address of the Giga762SX WLAN dsl in the browser's address field:
http://sx762 or http://10.0.0.2
The login screen appears:
For your security, the configuration program is protected with a pass-
word. The default password generally required is admin.
ì
Enter the password.
The user interface
37