Table of Contents
Advertisement
Chapter 4
Communication Ports
SFP Transceiver
RUGGEDCOM SFP1132-1LX10
RUGGEDCOM SFP1132-1LX25
RUGGEDCOM SFP1132-1LX40
RUGGEDCOM SFP1132-1LX70
RUGGEDCOM SFP1132-1LX100
RUGGEDCOM SFP1132-1LX115
a
MM = Multi-Mode, SM = Single-Mode
b
The RUGGEDCOM RSG2100PF supports only 100/1000 Mbit/s.
Section 4.5
GBIC Optic Ethernet Ports
GBIC (Gigabit Interface Converter) optic Ethernet ports are available with SC (Standard or Subscriber Connector)
connectors.
Figure 21: SC Port
1. Tx Connector 2. Rx Connector
CONTENTS
•
Section 4.5.1, "Installing a GBIC Optical Port"
•
Section 4.5.2, "Removing a GBIC Optical Port"
Section 4.5.1
Installing a GBIC Optical Port
To install a GBIC optical port, do the following:
CAUTION!
Electrical hazard – risk of damage to equipment. Use only components certified by Siemens with
RUGGEDCOM products. Damage to the module and device may occur if compatibility and reliability
have not been properly assessed.
26
Order Code
6GK6000-8FG52-0AA0
6GK6000-8FG53-0AA0
6GK6000-8FG57-0AA0
6GK6000-8FG54-0AA0
6GK6000-8FG55-0AA0
6GK6000-8FE56-0AA0
1
Speed
a
Mode
(Mbit/s)
1000
SM
1000
SM
1000
SM
1000
SM
1000
SM
1000
SM
2
RUGGEDCOM RSG2100PF
Installation Guide
Nominal Distance (km)
10
25
40
70
100
115
GBIC Optic Ethernet Ports
Advertisement
Table of Contents
