Table of Contents
Advertisement
SIEMENS 5890 DSL Router
User's Guide
Secure Mode Configuration
You can enable secure mode to control whether an interface is trusted or untrusted. To configure Secure
Mode:
1. Click Secure Mode Configuration on the left navigation pane of the User Management page. This
displays the Secure Mode Configuration page.
2. Do one of the following for Secure Mode:
•
Click the box next to Enabled so a check mark appears. This enables secure mode.
•
Click the box next to Enabled so there is no check mark. This disables secure mode.
3. If you enabled secure mode, select one of the following for LAN Interface and WAN Interface:
•
Trusted:
A trusted interface does not have to come over an encrypted tunnel.
•
Untrusted:
An untrusted interface must come over an encrypted tunnel, such as SSH or telnet-over-IPSec.
SIEMENS
Chapter 4 User Setup
User Management
33
Advertisement
Table of Contents
