Connecting Wired To The Pc; Connecting To The Mains Power Supply - Siemens Gigaset SX761 dsl Manual

Connecting wired to the PC

You can connect wired PCs to your Gigaset SX761 dsl to create a local area network
(LAN).
First connect just one PC to the Gigaset SX761 dsl. You can then carry out the general
configuration. (If you wish to connect more PCs, please turn to page 22.)
ì
Connect one of the LAN ports (LAN1 – LAN4, yellow) on the Gigaset SX761 dsl to
the Ethernet network card in your PC. To do this, use the LAN cable supplied (CAT5,
yellow).

Connecting to the mains power supply

Please remember:
Only use the mains adapter supplied with the device (12V 1.5A DC).
ì
Connect the mains adapter cable to the PWR socket on the Gigaset SX761 dsl.
ì
Plug the mains adapter into a mains socket.
ì
If your device has an on/off button, switch on the device.
The Gigaset SX761 dsl is now switched on and ready for operation.
LAN cable (yellow)
First steps
21