Management Accounts; Remote Access - Siemens SLI-5310 User Manual

ADSL Router User Manual

Management Accounts

This page allows you to change the user name and password for accessing your
IAD.
For the Admin Account, the default
setting for both username and
password are admin. If you want to
change the username and the
password, please modify the User
Name and New Password, and then
retype the new password in the
Confirm field for confirmation. Then
click Apply.
To create a user account, you may
setup a username and password
under User Account on the same
page.
Note that the new user can merely
access the Quick Start and Status
page.

Remote Access

There are seven interfaces for the remote access. Please choose from them if you
want to enable the remote access control.
Select the Internet Connect:
Select one connection item from the
drop-down list to enable the function.
Web Browser:
Check this box if you want to have
remote control through HTTP. The
default port number is 8080. Modify
the port whenever you want.
Telnet:
Check this box if you want to have
remote control through telnet.
FTP:
Choose this box if you want to have
remote control through FTP.
SNMP:
Choose this box if you want to have
remote control through SNMP agent.
TFTP:
Choose this box if you want to have
remote control through TFTP.
Secure Shell (SSH):
Choose this box if you want to have
remote control through SSH.
Ping:
Choose this box if you want to have
remote control through ping command
under DOS prompt.
106