Assigning A Password - Siemens Gigaset SX761 dsl Manual

Assigning a password

In the first step of the configuration you can change the password for the user interface.
When the device is supplied, the configuration of your Gigaset SX761 dsl is protected
with the admin password. To prevent unauthorised changes to the configuration, you
should change the password at regular intervals.
ì
Enter the old password in the Current password field.
ì
Enter the new password in the New password field and repeat the entry in the
Confirm new password field.
The password may contain up to 20 characters. Note case sensitivity. Avoid proper
names and all too obvious words. Use a combination of letters, digits and special
characters.
Note:
If you ever forget your password you will have to return the Gigaset SX761 dsl to its
factory settings (page 83). Please bear in mind that this will restore all settings to the
factory configuration. The password will again be admin.
ì
To go to the next step, click Next >
Security Setup Wizard
35