Command Reference Guide
Cellular Interface Command Set
snmp trap cellular
Use the snmp trap cellular command to enable all of the cellular Simple Network Management Protocol
(SNMP) traps except the SNMP link-status trap. Use the no form of this command to disable all cellular
traps except the SNMP link-status trap.
Syntax Description
No subcommands.
Default Values
By default, all interfaces (except virtual Frame Relay interfaces and subinterfaces) have SNMP traps
enabled.
Command History
Release 4.01
Command was introduced.
Usage Examples
The following example enables all cellular SNMP traps on interface cellular 1/1:
(config)#interface cellular 1/1
(config-cellular 1/1)#snmp trap cellular
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1553