ADTRAN AOS Version R10.1.0 Command Reference Manual page 1555

Command Reference Guide
snmp trap threshold-rssi <value>
Use the snmp trap threshold-rssi command to specify the threshold value that will generate a recieved
signal strength indication (RSSI) trap. Use the no form of this command to remove the RSSI threshold.
Syntax Description
<value>
Default Values
By default, the RSSI trap threshold is -200.
Command History
Release 4.01
Usage Examples
The following example configures an RSSI threshold of -100 on interface cellular 1/1:
(config)#interface cellular 1/1
(config-cellular 1/1)#snmp trap threshold-rssi -100
60000CRG0-35E
Specifies the threshold value for the RSSI trap.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Cellular Interface Command Set
1555