ADTRAN AOS Version R10.1.0 Command Reference Manual page 1538

Command Reference Guide
apn <name>
Use the apn command to change the name of the access point associated with your universal serial bus
(USB) cellular modem. Use the no version of this command to remove the name.
Syntax Description
<name>
Default Values
By default, the APN is set to the name provided by the cellular service provider.
Command History
Release 18.2
Functional Notes
If you purchased your USB cellular modem in the Unites States, your APN is automatically set correctly.
ADTRAN recommends that you do not change this setting. In countries other than the United States,
where modems and cellular service are sold separately, the APN may not be defined. If the APN is not
defined or incorrect, contact your service provider.
Usage Examples
In the following example, the APN is specified as isp.cingular:
(config)#interface cellular 1/1
(config-cellular 1/1)#apn isp.cingular
60000CRG0-35E
Specifies the modem's access point name (APN) that is supplied by your
service provider.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Cellular Interface Command Set
1538