Adsl Interface Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
ADSL I
NTERFACE
To activate the ADSL Interface Configuration mode, enter the interface adsl command at the Global
Configuration mode prompt. For example:
>enable
#configure terminal
(config)#interface adsl 0/1
(config-adsl 0/1)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
alias "<text>" on page 66
cross-connect on page 67
description <text> on page 70
do on page 71
end on page 72
exit on page 73
interface on page 74
shutdown on page 82
All other commands for this command set are described in this section in alphabetical order.
interop-flag on page 1518
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page 1519
phy-flag on page 1520
retrain on page 1521
snr-margin on page 1522
training-mode on page 1523
60000CRG0-35E
C S
OMMAND ET
Copyright © 2012 ADTRAN, Inc.

ADSL Interface Command Set

1517