ADTRAN AOS Version R10.1.0 Command Reference Manual page 1554

Command Reference Guide
snmp trap threshold-ecio <value>
Use the snmp trap threshold-ecio command to specify the threshold value that will generate a code
division multiple access (CDMA) correlated signal strength (Ec/Io) trap. Use the no form of this command
to remove the Ec/Io threshold.
Syntax Description
<value>
Default Values
By default, the Ec/Io trap threshold is -200.
Command History
Release 4.01
Usage Examples
The following example configures an Ec/Io threshold of -100 on interface cellular 1/1:
(config)#interface cellular 1/1
(config-cellular 1/1)#snmp trap threshold-ecio -100
60000CRG0-35E
Specifies the threshold value for the Ec/Io trap.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Cellular Interface Command Set
1554