Table of Contents
Advertisement
Command Reference Guide
resource pool-member <name>
Use the resource pool-member command to assign the interface to a resource pool, making it a demand
routing resource. Use the no form of this command to return to the default value. Variations of this
command include:
resource pool-member <name>
resource pool-member <name> <priority>
Syntax Description
<name>
<priority>
Default Values
By default, the interface is not assigned to any resource pool.
Command History
Release 11.1
Usage Examples
The following example configures a basic rate interface (BRI) as a member of resource pool MyPool:
(config)#interface bri 1/2
(config-bri 1/2)#resource pool-member MyPool
60000CRG0-35E
Specifies the name of the resource pool to which this interface is assigned.
Optional. Specifies the priority value of using this interface versus other
interfaces contained in the specified resource pool using a number 1 to 255.
Lower numbers indicate higher priority. Interfaces with the same priority are
selected in alphabetical order by interface name.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
BRI Interface Command Set
1535
Advertisement
Table of Contents
