ADTRAN AOS Version R10.1.0 Command Reference Manual page 1544

Command Reference Guide
custom-profile primary-ha-address <ip address>
Use the custom-profile primary-ha-address command to specify the primary home agent IP address for
the cellular custom profile. Use the no form of this command to remove the primary home agent IP address
from the custom profile settings.
Syntax Description
<ip address>
Default Values
By default, no custom profile is configured.
Command History
Release 17.5
Functional Notes
Cellular custom profile settings are useful for services that require manual activation or for services that
allow remote access to private networks over the 3G network. For more information about custom profile
settings, refer to the 3G CDMA NIM and the Cellular Interface configuration guide available online at
https://supportforums.adtran.com
Usage Examples
The following example specifies the primary home agent IP address for the custom profile:
(config)#interface cellular 1/1
(config-cellular 1/1)#custom-profile primary-ha-address 192.168.1.5
60000CRG0-35E
Specifies the IP address of the primary home agent. Enter IP addresses in
dotted decimal notation (XX.XX.XX.XX).
Command was introduced.
(article number 2331).
Copyright © 2012 ADTRAN, Inc.
Cellular Interface Command Set
1544