Table of Contents
Advertisement
Command Reference Guide
Line (Telnet) Interface Command Set
login
Use the login command to enable security login on the line session requiring the password configured
using the password command. Use the no form of this command to disable the login feature.
Syntax Description
No subcommands.
Default Values
By default, secure login is disabled.
Command History
Release 1.1
Command was introduced.
Usage Examples
The following example enables the security login feature and specifies a password on all the available
Telnet sessions (0 through 4):
(config)#line telnet 0 4
(config-telnet0-4)#login
(config-telnet0-4)#password mypassword
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1512
Advertisement
Table of Contents
