Table of Contents
Advertisement
Command Reference Guide
maintenance
Use the maintenance command to force a reset of the interface (initiating the SABME/UA process) or to
reset the D-channel (by sending a RESTART message). Variations of this command include:
maintenance reset
maintenance restart-d
The maintenance command disrupts data flow on the integrated services digital network
(ISDN) interface. All active calls will drop when the reset or restart process begins.
Syntax Description
reset
restart-d
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Usage Examples
The following example resets the basic rate interface (BRI) 1/2 interface:
(config)#interface bri 1/2
(config-bri 1/2)#maintenance reset
60000CRG0-35E
Forces a complete reset of the interface by initiating the SABME/UA
process.
Resets the D-channel by sending a Q.931 RESTART message to the
central office switch.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
BRI Interface Command Set
1534
Advertisement
Table of Contents
