ADTRAN AOS Version R10.1.0 Command Reference Manual page 1511

Command Reference Guide
line-timeout <value>
Use the line-timeout command to specify the number of minutes a line session may remain inactive before
AOS terminates the session. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the line-timeout is set to 15 minutes (Console and Telnet).
Command History
Release 1.1
Usage Examples
The following example specifies a timeout of 2 minutes:
(config)#line telnet 0
(config-telnet0)#line-timeout 2
60000CRG0-35E
Specifies the number of minutes a line session may remain inactive before
AOS terminates the session. Range is 0 to 35791 minutes.
Entering a line-timeout value of 0 disables the feature.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Line (Telnet) Interface Command Set
1511