ADTRAN AOS Version R10.1.0 Command Reference Manual page 1546

Command Reference Guide
custom-profile username <username>
Use the custom-profile username command to specify the username and password for the cellular custom
profile. Use the no form of this command to remove the username and password from the custom profile
settings. Variations of this command include:
custom-profile username <username>
custom-profile username <username> password ascii <password>
custom-profile username <username> password hexadecimal <password>
Syntax Description
username <username>
password ascii <password>
password hexadecimal <password>
Default Values
By default, no custom profile is configured.
Command History
Release 17.5
Functional Notes
Cellular custom profile settings are useful for services that require manual activation or for services that
allow remote access to private networks over the 3G network. For more information about custom profile
settings, refer to the 3G CDMA NIM and the Cellular Interface configuration guide available online at
https://supportforums.adtran.com
Usage Examples
The following example specifies the user name and plain text password for the custom profile:
(config)#interface cellular 1/1
(config-cellular 1/1)#custom-profile username USERNAME password ascii PASSWORD
60000CRG0-35E
Specifies the user name for the custom profile. The user
name is equivalent to network address identifier (NAI) user
identification. User names can be up to 72 characters in
length.
Specifies the plain text password. Passwords are equivalent
to authentication, authorization, and accounting (AAA)
shared secrets. Passwords can be up to 16 characters in
length.
Specifies the hexadecimal password. Passwords are
equivalent to AAA shared secrets. Passwords can be up to
32 characters in length.
Command was introduced.
(article number 2331).
Copyright © 2012 ADTRAN, Inc.
Cellular Interface Command Set
1546