ADTRAN AOS Version R10.1.0 Command Reference Manual page 1531

Command Reference Guide
isdn switch-type
Use the isdn switch-type command to specify the integrated services digital network (ISDN) signaling
type configured on the basic rate interface (BRI). The type of ISDN signaling implemented on the BRI
does not always match the manufacturer of the central office switch. Use the no form of this command to
return to the default value. Variations of this command include:
isdn switch-type basic-5ess
isdn switch-type basic-dms
isdn switch-type basic-net3
isdn switch-type basic-ni
Syntax Description
basic-5ess
basic-dms
basic-net3
basic-ni
Default Values
By default, the ISDN signaling is set to National ISDN-1 (basic-ni).
Command History
Release 1.1
Functional Notes
The isdn switch-type command specifies the type of ISDN signaling implemented on the BRI, not the
manufacturer of the central office switch. It is quite possible to have a Lucent Central Office switch
providing National ISDN signaling on the BRI.
Usage Examples
The following example configures a BRI for a circuit with Lucent 5ESS (custom) signaling:
(config)#interface bri 1/2
(config-bri 1/2)#isdn switch-type basic-5ess
60000CRG0-35E
Specifies Lucent/AT&T 5ESS signaling.
Specifies Nortel DMS-100 custom signaling.The basic-dms signaling type
is not compatible with proprietary SL-1 DMS signaling.
Specifies Net3 Euro-ISDN signaling.
Specifies National ISDN-1 signaling.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
BRI Interface Command Set
1531