Table of Contents
Advertisement
Command Reference Guide
resource pool-member <name>
Use the resource pool-member command to configure the cellular interface as a resource pool member
for the demand interface to draw upon when connecting to the cellular network. Use the no form of this
command to remove the interface from the resource pool. Variations of this command include:
resource pool-member <name>
resource pool-member <name> <priority>
Syntax Description
<name>
<priority>
Default Values
By default, the cellular interface is not associated with any resource pools.
Command History
Release 17.2
Functional Notes
Lower priority values indicate a higher priority. Interfaces within the same resource pool with the same
priority are selected as resources in alphabetical order by interface name.
Usage Examples
The following example configures interface cellular 1/1 as a member of the cellular resource pool:
(config)#interface cellular 1/1
(config-cellular 1/1)#resource pool-member cellular
60000CRG0-35E
Specifies the resource pool to which the cellular interface is assigned.
Optional. Specifies the priority this interface is given over other interfaces in
the same pool. Range is 1 to 255.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Cellular Interface Command Set
1551
Advertisement
Table of Contents
