ADTRAN AOS Version R10.1.0 Command Reference Manual page 1552

Command Reference Guide Cellular Interface Command Set
retry-throttling
Use the retry-throttling command to enable retry throttling. Use the no form of this command to disable
retry throttling.
Syntax Description
No subcommands.
Default Values
In the Verizon cellular network, the retry throttle is enabled and cannot be disabled.
In the Sprint cellular network, the retry throttle is disabled by default but can be enabled by using this
command.
Command History
Release 17.5 Command was introduced.
Functional Notes
When the retry throttle is enabled, it will disable the cellular interface for 15 minutes if a data call fails.
Usage Examples
The following example enables retry throttling:
(config)#interface cellular 1/1
(config-cellular 1/1)#retry-throttling
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1552