ADTRAN AOS Version R10.1.0 Command Reference Manual page 1543

Command Reference Guide
custom-profile home-address <ip address>
Use the custom-profile home-address command to specify the home address for the cellular custom
profile. Use the no form of this command to remove the home address from the custom profile settings.
Syntax Description
<ip address>
Default Values
By default, no custom profile is configured.
Command History
Release 17.5
Functional Notes
Cellular custom profile settings are useful for services that require manual activation or for services that
allow remote access to private networks over the 3G network. For more information about custom profile
settings, refer to the 3G CDMA NIM and the Cellular Interface configuration guide available online at
https://supportforums.adtran.com
Usage Examples
The following example creates the home address for the custom profile:
(config)#interface cellular 1/1
(config-cellular 1/1)#custom-profile home-address 192.168.1.1
60000CRG0-35E
Specifies the IP address of the home address. Enter IP addresses in dotted
decimal notation (XX.XX.XX.XX).
Command was introduced.
(article number 2331).
Copyright © 2012 ADTRAN, Inc.
Cellular Interface Command Set
1543