ADTRAN AOS Version R10.1.0 Command Reference Manual page 1513

Command Reference Guide
login authentication <listname>
Use the login authentication command to apply the named authentication, authorization, and accounting
(AAA) login method list to the line interface for authenticating users connecting to the interface. Use the
no form of this command to remove the authentication method list from the interface.
Syntax Description
<listname>
Default Values
By default, no AAA login authentication method list is specified. If AAA is enabled (using the command
on on page 889), but no login authentication method list is specified, the default login authentication
method list is used. If the default list is used, but the default list has not been configured, Telnet interfaces
use the local user database for authentication.
Command History
Release 5.1
Functional Notes
AAA login authentication method lists are used to verify user logins on the line interface. For more
information about configuring login authentication method lists, refer to the command
login on page 871.
For more information about configuring AAA on your network, refer to the configuration guide Configuring
AAA in AOS available online at https://supportforums.adtran.com.
Usage Examples
The following example specifies that the AAA login authentication method list AuthList1 is applied to all
Telnet lines:
(config)#line telnet 0 4
(config-telnet0-4)#login authentication AuthList1
60000CRG0-35E
Specifies the AAA login authentication method list to use for authentication.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Line (Telnet) Interface Command Set
aaa authentication
aaa
1513