Texas Instruments OMAP5912 Reference Manual page 574

Ultralow-Power Device
Table 20. Software Request Register (SOFT_REQ_REG) (Continued)
Bit Name
8 SOFT_USB_OTG_DPLL_REQ
7 SOFT_CAM_DPLL_MCKO_REQ
6 SOFT_COM_MCKO_REQ
5 SOFT_PERIPH_REQ
4 USB_REQ_EN
3 SOFT_USB_REQ
2 SOFT_SDW_REQ
1 SOFT_COM_REQ
0 SOFT_DPLL_REQ
Table 21. Counter 32 FIQ Register (COUNTER_32_FIQ_REG)
Bit Name
15:8 UNUSED
7:0 COUNTER_32_FIQ
56 Power Management
Base Address = 0xFFFE 0800, Offset = 0x34
Function
Software request for USB OTG for ULPD_PLL
clock.
1: Request active
0: Request inactive
Software camera ULPD_PLL request.
1: Request active
0: Request inactive
Software request for COM_MCKO clock.
1: Request active
0: Request inactive
Software system clock request for UART2.
1: Request active
0: Request inactive
0: Disable USB client hardware DPLL request
1: Enable
Software system clock request for USB host.
1: Request active
0: Request inactive
Software systm clock request for Bluetooth.
1: Request active
0: Request inactive
Software system clock request for com
processor
1: Request active
0: Request inactive
Software ULPD_PLL clock request
1: Request active
0: Request inactive
Base Address = 0xFFFE 0800, Offset = 0x38
Function
Unused
Number of 32-kHz clock cycles to delay active
modem shutdown signal after receiving FIQ
R/W Reset
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x1
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W Reset
R/W 0x0
R/W 0x01
SPRU753A