Texas Instruments OMAP5912 Reference Manual page 457

Configuration
Table 11. Functional Multiplexing Control O Register (FUNC_MUX_CTRL_0)
(Continued)
Bit Name
11 BVLZ_MASK_IN
10 BVLZ_MASK_OUT
9 BLUETOOTH
8 CAMERA
7 USB.CLK0
6 COM_SHUT
5 GIGA_UART
4 MEDIA_HIZ_DISABLE
3 LCD
2 NFCS2
1:0 LB_HSAB_RHEA
Notes: 1) This function has been removed. Writing a 1 or a 0 to this register is acceptable. However, it is recommended
to write a 0, in case functions are added to this register space in the future.
40 Initialization
Base Address = 0xFFFE 1000, Offset Address = 0x00
Function
This register enables the Inhibit1 function.
Depending on the status of BVLZ input pin,
subject inputs are gated to low internally when
this function is enabled.
1: Enables AND gating of inputs with BVLZ
input pin.
0: Disables AND gating of inputs with BVLZ
input pin.
This function is called Inhibit1 in SPRS231.
This register enables the Gated1 function.
Depending on the status of BVLZ, subject
outputs are gated to low when this function is
enabled.
1: Enables AND gating of outputs with BVLZ
input pin.
0: Disables AND gating of outputs with BVLZ
input pin.
This function is called Gated1 in SPRS231.
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
R/W Reset
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
SPRU752B