Texas Instruments OMAP5912 Reference Manual page 809

Multimedia processor device overview and architecture

Hide thumbs Also See for OMAP5912:

Table of Contents

About This Manual

Notational Conventions

Related Documentation From Texas Instruments

This chapter describes the memory interfaces of the OMAP5912 multimedia

This document uses the following conventions.

Hexadecimal numbers are shown with the suffix h. For example, the

following number is 40 hexadecimal (decimal 64): 40h.

The following documents describe the OMAP5910 device and related

peripherals. Copies of these documents are available on the Internet at

www.ti.com. Tip: Enter the literature number in the search box provided at

OMAP5912 Multimedia Processor Device Overview and Architecture

Reference Guide (literature number SPRU748) introduces the setup,

components, and features of the OMAP5912 multimedia processor and

provides a high-level view of the device architecture.

OMAP5912 Multimedia Processor OMAP 3.2 Subsystem Reference

Guide (literature number SPRU749) introduces and briefly defines the

main features of the OMAP3.2 subsystem of the OMAP5912 multimedia

OMAP5912 Multimedia Processor DSP Sybsystem Reference Guide (lit-

erature number SPRU750) describes the OMAP5912 multimedia proc-

essor DSP subsystem. The digital signal processor (DSP) subsystem is

built around a core processor and peripherals that interface with: 1) The

ARM926EJS via the microprocessor unit interface (MPUI); 2) Various

standard memories via the external memory interface (EMIF); 3) Various

system peripherals via the TI peripheral bus (TIPB) bridge.

Read This First

Chapters

Table of Contents