Texas Instruments OMAP5912 Reference Manual page 464

Table 21. Functional Multiplexing Control 9 Register (FUNC_MUX_CTRL_9)
Bit Name
31:30 RESERVED
29:27 CONF_W15
26:24 CONF_W14
23:21 CONF_Y14
20:18 CONF_V14
17:15 CONF_R14
14:12 CONF_AA15 Controls multiplexing on AA15. Formerly CONF_RTS1_R.
11:9 CONF_AA20 Controls multiplexing on AA20. Formerly
8:6 CONF_U20
5:3 CONF_W16
2:0 CONF_W13
Table 22. Functional Multiplexing Control A Register (FUNC_MUX_CTRL_A)
Bit Name
31:30 RESERVED
29:27 CONF_P11
SPRU752B
This register controls functional multiplexing. COMP_MODE_CTRL_0 must
be programmed to 0xEAEFh for this register to control functional multiplexing.
See Table 8 for bit field values.
Base Address = 0xFFFE 1000, Offset Address = 0x28
Function
Reserved for future expansion.
Controls multiplexing on W15. Formerly
CONF_UARTS_CLKREQ_R.
Controls multiplexing on W14. Formerly
CONF_MCSI1_DOUT_R.
Controls multiplexing on Y14. Formerly CONF_TX1_R.
Controls multiplexing on V14. Formerly CONF_RX1_R.
Controls multiplexing on R14. Formerly CONF_CTS1_R.
CONF_NRESET_OUT_R.
Controls multiplexing on U20. Formerly
CONF_MPU_NRESET_R.
Controls multiplexing on W16. Formerly
CONF_MCBSP3_CLK_R.
Controls multiplexing on W13. Formerly
CONF_WAKEUP_INT_R.
This register controls functional multiplexing. COMP_MODE_CTRL_0 must
be programmed to 0xEAEFh for this register to control functional multiplexing.
See Table 8 for bit field values.
Base Address = 0xFFFE 1000, Offset Address = 0x2C
Function
Reserved for future expansion.
Controls multiplexing on P11. Formerly CONF_MMC_CMD_R.
Configuration
R/W Reset
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W Reset
R/W 0x0
R/W 0x0
Initialization 47