Texas Instruments OMAP5912 Reference Manual page 488

Table 37. Functional Multiplexing Control E Register (FUNC_MUX_CTRL_E)
Bit Name
31:30 RESERVED
29:27 CONF_G14
26:24 CONF_H13
23:21 CONF_A20
20:18 CONF_B19
17:15 CONF_C18
14:12 CONF_D17
11:9 CONF_B18
8:6 CONF_D16
5:3 CONF_C17
2:0 CONF_B17
SPRU752B
Base Address = 0xFFFE 1000, Offset Address = 0x90
Function
Reserved for future expansion.
Controls multiplexing on G14. Formerly
CONF_LCD_PIXEL_3_R.
Controls multiplexing on H13. Formerly
CONF_LCD_PIXEL_4_R.
Controls multiplexing on A20. Formerly
CONF_LCD_PIXEL_5_R.
Controls multiplexing on B19. Formerly
CONF_LCD_PIXEL_6_R.
Controls multiplexing on C18. Formerly
CONF_LCD_PIXEL_7_R.
Controls multiplexing on D17. Formerly
CONF_LCD_PIXEL_8_R.
Controls multiplexing on B18. Formerly CONF_LCD_VSYNC_R.
Controls multiplexing on D16. Formerly
CONF_LCD_PIXEL_9_R.
Controls multiplexing on C17. Formerly CONF_LCD_
PIXEL_10_R.
Controls multiplexing on B17. Formerly CONF_LCD_
PIXEL_11_R.
This register controls functional multiplexing. COMP_MODE_CTRL_0 must
be programmed to 0xEAEF for this register to control functional multiplexing.
See Table 8 for bit-field values.
Configuration
R/W Reset
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0X0
R/W 0x0
R/W 0X0
R/W 0X0
Initialization 71