Texas Instruments OMAP5912 Reference Manual page 466

Table 23. Functional Multiplexing Control B Register (FUNC_MUX_CTRL_B)
Bit Name
5:3 CONF_Y10
2:0 CONF_R11
Table 24. Functional Multiplexing Control C Register (FUNC_MUX_CTRL_C)
Bit Name
31:30 RESERVED
29:27 CONF_V6
26:24 CONF_W5
23:21 CONF_Y5
20:18 CONF_R9
17:15 CONF_AA5
14:12 CONF_W6
11:9 CONF_Y6
8:6 CONF_V7
5:3 CONF_W7
2:0 CONF_P10
SPRU752B
Base Address = 0xFFFE 1000, Offset Address = 0x30
Function
Controls multiplexing on Y10. Formerly CONF_MCSI2_CLK_R.
Controls multiplexing on R11. Formerly CONF_MMC_DAT0_R.
This register controls functional multiplexing. COMP_MODE_CTRL_0 must
be programmed to 0xEAEFh for this register to control functional multiplexing.
See Table 8 for bit field values.
Base Address = 0xFFFE 1000, Offset Address = 0x34
Function
Reserved for future expansion.
Controls multiplexing on V6. Formerly CONF_TX2_R.
Controls multiplexing on W5. Formerly CONF_RTS2_R.
Controls multiplexing on Y5. Formerly CONF_CTS2_R.
Controls multiplexing on R9. Formerly CONF_RX2_R.
Controls multiplexing on AA5. Formerly
CONF_MCBSP2_DOUT_R.
Controls multiplexing on W6. Formerly
CONF_MCBSP2_RSYNC_R.
Controls multiplexing on Y6. Formerly CONF_MCBSP2_CLKX_R.
Controls multiplexing on V7. Formerly CONF_MCBSP2_CLKR_R.
Controls multiplexing on W7. Formerly
CONF_MCBSP2_XSYNC_R.
Controls multiplexing on P10. Formerly CONF_MCBSP2_DIN_R.
This register controls functional multiplexing. COMP_MODE_CTRL_0 must
be programmed to 0xEAEFh for this register to control functional multiplexing.
See Table 8 for bit field values.
Configuration
R/W Reset
R/W 0x0
R/W 0x0
R/W Reset
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
Initialization 49