Texas Instruments OMAP5912 Reference Manual page 897

Index
A
Asynchronous/synchronous burst memory 18
C
CompactFlash connection 83
CompactFlash controller 82
connection 83
interface registers 86
memory access mode selection 85
signal corrections 85
CompactFlash interface registers 86
CompactFlash signal connections 85
E
EMIFS with NAND CE care 71
EMIFS with NAND CE don't care 80
Erase operation, NAND flash 27
Error code correction, NAND flash 35
H
Hardware NAND flash controller 20
DMA support 45
erase operation 27
error code correction 35
FIFO 41
FIFO mode 46
host mode 45
invalid block management 39
memory core support 50
multiplane block erase 29
multiplane copy back program 31
multiplane page program 26
SPRU756A
NAND flash registers 52
postwrite 43
prefetch 41
read ID 34
read operation 23
read status and read multiplane status 32
reset 33
write operation 25
I
Invalid block management, NAND flash 39
M
Memory access mode, CompactFlash 85
Memory Interfaces introduction 15
asynchronous/synchronous burst memory 18
SDRAM interface 15
Multiplane block erase, NAND flash 29
Multiplane copy−back program, NAND flash 31
Multiplane page program, NAND flash 26
N
NAND flash controller peripheral 82
NAND flash DMA support 45
NAND flash FIFO 41
NAND flash FIFO mode 46
NAND flash host mode 45
NAND flash memory core support 50
NAND flash registers 52
NAND flash software read sequence 72
NAND flash software write sequence 75
NOR add−on option 82
Index
Index 91