Texas Instruments OMAP5912 Reference Manual page 463

Configuration
Table 19. Functional Multiplexing Control 7 Register (FUNC_MUX_CTRL_7)
(Continued)
Bit Name
17:15 CONF_T19
14:12 CONF_T20
11:9 CONF_R18
8:6 CONF_R19
5:3 CONF_M14
2:0 CONF_P18
Table 20. Functional Multiplexing Control 8 Register (FUNC_MUX_CTRL_8)
Bit Name
31:30 RESERVED
29:27 CONF_J20
26:24 CONF_W17
23:21 CONF_V16
20:18 CONF_Y12
17:15 CONF_W19
14:12 CONF_P15
11:9 CONF_N14
8:6 CONF_V19
5:3 CONF_W21
2:0 CONF_U18
46 Initialization
Base Address = 0xFFFE 1000, Offset Address = 0x20
Function
Controls multiplexing on T19. Formerly, CONF_ARMIO_4_R.
Controls multiplexing on T20. Formerly, CONF_ARMIO_5_R.
Controls multiplexing on R18. Formerly, CONF_GPIO_0_R.
Controls multiplexing on R19. Formerly, CONF_GPIO_1_R.
Controls multiplexing on M14. Formerly, CONF_GPIO_2_R.
Controls multiplexing on P18. Formerly, CONF_GPIO_3_R.
This register controls functional multiplexing. COMP_MODE_CTRL_0 must
be programmed to 0xEAEFh for this register to control functional multiplexing.
See Table 8 for bit field values.
Base Address = 0xFFFE 1000, Offset Address = 0x24
Function
Reserved for future expansion.
Controls multiplexing on J20. Formerly, CONF_ARM_BOOT_R.
Controls multiplexing on W17. Formerly, CONF_NEMU1_R.
Controls multiplexing on V16. Formerly, CONF_NEMU0_R.
Controls multiplexing on Y12. Formerly, CONF_ON_OFF_R.
Controls multiplexing on W19. Formerly, CONF_BVLZ_R.
Controls multiplexing on P15. Formerly,
CONF_WIRE_NSCS3_R.
Controls multiplexing on N14. Formerly,
CONF_WIRE_NSCS0_R.
Controls multiplexing on V19. Formerly, CONF_WIRE_SCLK_R.
Controls multiplexing on W21. Formerly, CONF_WIRE_SDO_R.
Controls multiplexing on U18. Formerly, CONF_WIRE_SDI_R.
R/W Reset
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W Reset
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
SPRU752B