Texas Instruments OMAP5912 Reference Manual page 478

Table 32. Voltage Control 0 Register (VOLTAGE_CTRL_0) (Continued)
Bit Name
7 CONF_VOLTAGE_
VDDSHV2_R
6 CONF_VOLTAGE_
VDDSHV1_R
5 RESERVED1
4 RESERVED2
3 RESERVED
†
For EMIFS and EMIFF 3.0-V and 3.3-V operation, use the 2.75V setting.
Note: For a description of 1.8-V and 2.75-V nominal voltage ranges, see the Data Manual (SPRS231).
SPRU752B
Base Address = 0xFFFE 1000, Offset Address = 0x60
Function
This bit controls the drive strength of the
DVDD2 voltage domain. The bit controls the
low/high voltage mode. The voltage range
supported is defined in the SPRS231
document.
0: Low-voltage mode drive strength of nominal
(nominal 1.80-V range).
1: Interface in high-voltage mode drive strength
(nominal 2.75-V range).
This bit controls the drive strength of the
DVDD1 voltage domain. The bit controls the
low/high voltage mode. The voltage range
supported is defined in the SPRS231
document.
0: Low-voltage mode drive strength of nominal
(nominal 1.80-V range).
1: Interface in high-voltage mode drive strength
(nominal 2.75-V range).
Reserved for potential low-power operation
control
Reserved for potential low-power operation
control
Reserved for potential low-power operation
control
Configuration
R/W Reset
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
Initialization 61