ADTRAN AOS Version R10.1.0 Command Reference Manual page 1575

Command Reference Guide
test-pattern
Use the test-pattern command to activate the built-in pattern generator and begin sending the specified
test pattern. This pattern generation can be used to verify a data path when used in conjunction with an
active loopback. Use the no form of this command to cease pattern generation. Variations of this command
include:
test-pattern ones
test-pattern zeros
Syntax Description
ones
zeros
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Usage Examples
The following example activates the pattern generator for a stream of continuous ones:
(config)#interface t1 1/2
(config-t1 1/2)#test-pattern ones
60000CRG0-35E
Generates a test pattern of continuous ones.
Generates a test pattern of continuous zeros.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DSX-1 Interface Command Set
1575