ADTRAN AOS Version R10.1.0 Command Reference Manual page 1591

Command Reference Guide
test-pattern
Use the test-pattern command to activate the built-in pattern generator and begin sending the specified
test pattern. This pattern generation can be used to verify a data path when used in conjunction with an
active loopback. Use the no form of this command to cease pattern generation. Variations of this command
include:
test-pattern clear
test-pattern errors
test-pattern insert
test-pattern ones
test-pattern p215
test-pattern p220
test-pattern p511
test-pattern qrss
test-pattern zeros
Syntax Description
clear
errors
insert
ones
p215
p220
p511
qrss
zeros
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Usage Examples
The following example activates the pattern generator for a stream of continuous ones:
(config)#interface e1 1/1
(config-e1 1/1)#test-pattern ones
60000CRG0-35E
Clears the test pattern error count.
Displays the test pattern error count.
Inserts an error into the currently active test pattern.
Generates test pattern of continuous ones.
Generates a pseudorandom test pattern sequence based on a 15-bit shift
register.
Generates a pseudorandom test pattern sequence based on a 20-bit shift
register.
Generates a test pattern of repeating ones and zeros.
Generates a test pattern of random ones and zeros.
Generates test pattern of continuous zeros.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
E1 Interface Command Set
1591