ADTRAN AOS Version R10.1.0 Command Reference Manual page 1561

Command Reference Guide
loopback
Use the loopback command to initiate a specified loopback on the interface. Use the no form of this
command to deactivate the loop. Variations of this command include:
loopback dte
loopback line
loopback remote
Syntax Description
dte
line
remote
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Usage Examples
The following example activates a line loopback on the DDS interface:
(config)#interface dds 1/1
(config-dds 1/1)#loopback line
60000CRG0-35E
Initiates a loop to connect the transmit and receive path through the unit.
Initiates a loop of the digital data service (DDS) circuit toward the network
by connecting the transmit path to the receive path.
Transmits a DDS loop code over the circuit to the remote unit. In response,
the remote unit should initiate a line loopback.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DDS Interface Command Set
1561