ADTRAN AOS Version R10.1.0 Command Reference Manual page 1566

Command Reference Guide
coding
Use the coding command to configure the line coding for a DSX-1 physical interface. This setting must
match the line coding supplied on the circuit by the PBX. Use the no form of this command to return to the
default setting. Variations of this command include:
coding ami
coding b8zs
Syntax Description
ami
b8zs
Default Values
By default, all DSX-1 interfaces are configured with b8zs line coding.
Command History
Release 1.1
Functional Notes
The line coding configured in the unit must match the line coding of the DSX-1 circuit. A mismatch will
result in line errors (e.g., bipolar violations (BPVs)).
Usage Examples
The following example configures the DSX-1 interface for ami line coding:
(config)#interface t1 1/2
(config-t1 1/2)#coding ami
60000CRG0-35E
Configures the line coding for alternate mark inversion (AMI).
Configures the line coding for bipolar eight zero substitution (B8ZS).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DSX-1 Interface Command Set
1566