Table of Contents
Advertisement
Command Reference Guide
framing crc4
Use the framing crc4 command to configure the framing format for the E1 interface. This parameter
should match the framing format provided by the service provider or external device. Use the no form of
this command to return to the default value.
Syntax Description
crc4
Default Values
By default, CRC4 is disabled.
Command History
Release 5.1
Functional Notes
The framing value must match the configuration of the E1 circuit. A mismatch will result in a loss of frame
alarm.
Usage Examples
The following example configures the E1 interface for CRC4 framing:
(config)#interface e1 1/1
(config-e1 1/1)#framing crc4
60000CRG0-35E
Enables CRC4 bits to be transmitted in the outgoing data stream. Also, the
received signal is checked for CRC4 errors.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
E1 Interface Command Set
1579
Advertisement
Table of Contents
