Built-In Self-Test Operation (Bist); Private Instructions; References - Analog Devices ADSP-21261 SHARC Hardware Reference Manual

Built-In Self-Test Operation (BIST)

No self-test functions are supported by the ADSP-2126x.
EMUIDLE Instruction
The instruction places the DSP in the idle state and triggers an
EMUIDLE
emulator interrupt. This operation uses the
ware breakpoint. When the
clock counter immediately halts.

Private Instructions

Table 6-2 lists the private instructions that are reserved for emulation and
memory test. The ADSP-2126x JTAG ICE emulator uses the TAP and
boundary scan as a way to access the processor in the target system. The
JTAG ICE emulator requires a target board connector for access to the
TAP.

References

• IEEE Standard 1149.1-1990. Standard Test Access Port and
Boundary-Scan Architecture.
To order a copy, contact IEEE at 1-800-678-IEEE.
• Maunder, C.M. and R. Tulloss. Test Access Ports and Boundary
Scan Architectures.
IEEE Computer Society Press, 1991.
• Parker, Kenneth. The Boundary Scan Handbook.
Kluwer Academic Press, 1992.
ADSP-2126x SHARC Processor Hardware Reference
JTAG Test Emulation Port
EMUIDLE
instruction is executed, the emulation
EMUIDLE
instruction as a soft-
6-9