ADTRAN AOS Version R10.1.0 Command Reference Manual page 1609

Command Reference Guide
ethernet-cfm down
Use the ethernet-cfm down command to enable Ethernet operations, administration, and maintenance
(OAM) connectivity fault management (CFM) on the Ethernet interface. Use the no form of this command
to disable Ethernet OAM CFM on this interface.
Syntax Description
No subcommands.
Default Values
By default, Ethernet OAM CFM is disabled.
Command History
Release 17.4
Release A4.01
Functional Notes
For more information about Ethernet OAM CFM and its operation on AOS products, refer to the Ethernet
OAM CFM in AOS configuration guide available online at
3013).
For more information regarding specific Ethernet OAM CFM configuration commands on the Ethernet
interface, refer to the Ethernet OAM CFM Command Set on page
Usage Examples
The following example enables Ethernet OAM CFM on Ethernet interface 0/1:
(config)#interface eth 0/1
(config-eth 0/1)#ethernet-cfm down
60000CRG0-35E
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet Interface.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
https://supportforums.adtran.com
3091.
(article number
1609