Ethernet Interface Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
E I
THERNET NTERFACE
There are multiple types of Ethernet interfaces associated with AOS:
• Basic Ethernet interfaces (e.g., eth 0/1)
• Gigabit Ethernet interfaces (e.g., giga-eth 0/3)
• Ethernet subinterfaces associated with a virtual local area network (VLAN) (e.g., eth 0/1.1)
• Switchport interfaces which are only available on specific platforms (e.g., swx 0/1)
• Gigabit Switchport interfaces which are only available on specific platforms (e.g., giga-swx 0/1)
Not all platforms have Ethernet subinterfaces, Gigabit Ethernet, switchport, or gigabit
switchport interfaces available. To see if your unit has this capability, type show interfaces
at the enable prompt.
To activate the basic Ethernet Interface Configuration mode, enter the interface ethernet command at the
Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#interface ethernet 0/1
(config-eth 0/1)#
To activate the Gigabit Ethernet Interface Configuration mode, enter the interface gigabit-ethernet
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#interface gigabit-ethernet 0/3
(config-giga-eth 0/3)#
60000CRG0-35E
C S
OMMAND ET
Copyright © 2012 ADTRAN, Inc.

Ethernet Interface Command Set

1594