ADTRAN AOS Version R10.1.0 Command Reference Manual page 1596

Command Reference Guide
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
alias "<text>" on page 66
cross-connect on page 67
description <text> on page 70
do on page 71
end on page 72
exit on page 73
interface on page 74
shutdown on page 82
All other commands for this command set are described in this section in alphabetical order.
arp arpa on page 1598
awcp on page 1599
bandwidth <value> on page 1600
bridge-group <number> on page 1601
bridge-group <number> vlan-transparent on page 1602
channel-group <number> mode on on page 1603
crypto map <name> on page 1604
dynamic-dns on page 1606
encapsulation 802.1q on page 1608
ethernet-cfm down on page 1609
ethernet-cfm mep on page 1610
full-duplex on page 1612
half-duplex on page 1613
ip commands begin on page 1614
ipv6 commands begin on page 1657
lldp receive on page 1685
lldp send on page 1686
mac-address <mac address> on page 1688
max-reserved-bandwidth <value> on page 1689
media-gateway ip on page 1690
no shutdown track <name> on page 1691
packet-capture <name> on page 1692
port-auth auth-mode on page 1693
port-auth control-direction on page 1694
port-auth multiple-hosts on page 1695
port-auth port-control on page 1696
power inline on page 1697
60000CRG0-35E Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1596