ADTRAN AOS Version R10.1.0 Command Reference Manual page 1632

Command Reference Guide
Syntax Description
static-group <address>
version [1 | 2]
Default Values
The defaults for this command are:
last-member-query-interval 1000 milliseconds
querier-timeout
query-interval
query-max-response-time
version
There are no default values for immediate-leave and static-group.
Command History
Release 7.1
Release A4.01
Usage Examples
The following example sets the query message interval on the interface to 200 milliseconds:
(config)#interface ethernet 0/1
(config-eth 0/1)#ip igmp last-member-query-interval 200
60000CRG0-35E
Configures the router's interface to be a statically connected member of
the specified group. Packets received on the correct reverse path
forwarding (RPF) interface are forwarded to this interface regardless of
whether any receivers have joined the specified group using IGMP. Use
the no form of this command to remove a configured static group.
Sets the interface's IGMP version. Use the no form of this command to
return to the default setting.
2x the query-interval value
60 seconds
10 seconds
Version 1
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet Interface.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1632