Texas Instruments OMAP5912 Reference Manual page 36

OMAP5912 Description
µWire
µWire Interface
Figure 9.
MPU TIPB (public)
MPU GPIOs
36 Introduction
The µWire module is a serial interface to drive external devices like EEPROM
or LCD with µWire standard.
DMA request
CSO, 1, 2, 3
The MPU has a 16-bit GPIO (MPUIO) with programmable debouncing circuit.
It can handle maskable interrupt generation on high-to-low or low-to-high
transition on pins configured as input.
OMAP5912
µWire
SDI
0
SDO
0
SCLK
0
UWIRE.SDI
UWIRE.SDO
UWIRE_SCLK
UWIRE.CS1, 2, 3
SPRU748A