Ip Ospf Authentication - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

ip ospf authentication

Use the ip ospf authentication command to authenticate an interface that is performing open shortest path
first (OSPF) authentication. Use the no form of this command to return to the default setting. Variations of
this command include:
ip ospf authentication
ip ospf authentication message-digest
ip ospf authentication null
Syntax Description
message-digest
null
Default Values
By default, this is set to null (meaning no authentication is used).
Command History
Release 3.1
Release 5.1
Release A4.01
Usage Examples
The following example specifies that no authentication will be used on the Ethernet interface:
(config)#interface ethernet 0/1
(config-eth 0/1)#ip ospf authentication null
60000CRG0-35E
Optional. Selects message-digest authentication type.
Optional. Specifies that no authentication is used.
Command was introduced.
Command was expanded to include the Ethernet subinterfaces.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet Interface.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1641