ADTRAN AOS Version R10.1.0 Command Reference Manual page 1694

Command Reference Guide
port-auth control-direction
Use the port-auth control-direction command to configure the direction in which traffic is blocked. This
command is only applicable when authentication is port based. Use the no form of this command to return
to the default setting. Variations of this command include:
port-auth control-direction both
port-auth control-direction in
Syntax Description
both
in
Default Values
By default, traffic is blocked in both directions.
Command History
Release 10.1
Usage Examples
The following example causes traffic to be blocked in both directions when the port becomes unauthorized:
(config)#interface ethernet 0/1
(config-eth 0/1)#port-auth control-direction both
60000CRG0-35E
Blocks traffic in both directions when the port becomes unauthorized.
Blocks only incoming traffic when the port becomes unauthorized.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1694