Command Reference Guide
port-auth port-control
Use the port-auth port-control command to configure the port-authorization state. Use the no form of
this command to return to the default setting. Variations of this command include:
port-auth port-control auto
port-auth port-control force-authorized
port-auth port-control force-unauthorized
Syntax Description
auto
force-authorized
force-unauthorized
Default Values
By default, all ports are forced to an authorized state.
Command History
Release 10.1
Usage Examples
The following example forces Ethernet port 0/1 into an unauthorized state:
(config)#interface ethernet 0/1
(config-eth 0/1)#port-auth port-control force-unauthorized
60000CRG0-35E
Enables the port-authentication process.
Forces the port into an authorized state.
Forces the port into an unauthorized state.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1696