ADTRAN AOS Version R10.1.0 Command Reference Manual page 1710

Command Reference Guide
spanning-tree pathcost method
Use the spanning-tree pathcost method command to select a short or long method used by the
spanning-tree protocol. Variations of this command include:
spanning-tree pathcost method long
spanning-tree pathcost method short
Syntax Description
long
short
Default Values
By default, spanning-tree pathcost method is set to short.
Command History
Release 5.1
Usage Examples
The following example specifies that the spanning tree protocol use a long pathcost method:
(config)#interface ethernet 0/3
(config-eth 0/3)#spanning-tree pathcost method long
60000CRG0-35E
Specifies 32-bit values when calculating pathcosts.
Specifies 16-bit values when calculating pathcosts.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1710