Command Reference Guide
HSSI Interface Command Set
external-loopback-request
Use the external-loopback-request command to enable LC (loopback circuit C) input to control
loopbacks toward the network. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Command History
Release 7.1
Command was introduced.
Usage Examples
The following example enables the unit to accept external loopback requests:
(config)#interface hssi 1/1
(config-hssi 1/1)#external-loopback-request
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1786