ADTRAN AOS Version R10.1.0 Command Reference Manual page 1716

Command Reference Guide
subtended-host mode
Use the subtended-host mode command to enable or disable subtended host listening on the interface.
Subtended host provisioning is used when the AOS unit with the Ethernet in the First Mile (EFM) NIM2
receives provisioning from a Total Access 5000 unit. Variations of this command include:
subtended-host mode listener
subtended-host mode disabled
Syntax Description
listener
disabled
Default Values
By default, the first configured interface has pre-provisioning listening enabled. Any additional interfaces
have pre-provisioning listening disabled.
Command History
Release A5.01
Functional Notes
Only one interface at a time can have the subtended-host mode set to listener. If all interfaces have a
subtended-host mode of disabled, then all pre-provisioning information is discarded.
Usage Examples
The following example enables the Ethernet interface 0/1 to receive subtended-host provisioning:
(config)#interface ethernet 0/1
(config-eth 0/1)#subtended-host mode listener
60000CRG0-35E
Enables the interface to receive pre-provisioning information from the Total
Access 5000.
Disables the interface from receiving any pre-provisioning information from
the Total Access 5000.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet Interface Command Set
1716